Product Description
JH6006 is an electronic tag reader and writer that works in the FCC 902~928MHz frequency band and complies with the ISO18000-6C (EPC C1G2) protocol. It combines a proprietary and efficient electronic tag collision processing algorithm to achieve high reading rate while maintaining a high reading rate. The fast reading and writing processing of tags can be widely used in various radio frequency identification (RFID) systems such as logistics, personal identification, smart parking lots, access control systems, anti-counterfeiting systems and production process control.
Advantages: small size, beautiful appearance, protection level up to IP67, high gain, low standing wave, low axis ratio, high bandwidth, excellent tag reading performance within the working bandwidth.
Precautions:
1. It is not recommended to use it in an environment where the antenna is close to metal.
2. The front-to-back ratio of the antenna is small, and the reader module needs to be physically shielded.
Application scenarios
-Smart parking lot
-Electric vehicle management
-Personal identification
-Asset management
-Animal management
-Management of items entering and leaving the warehouse
-ETC vehicle management
-Production process management
Features:
1. Based on dedicated reading and writing chip design;
2. Fully supports electronic tags that comply with UHF EPC Gen2 (ISO18000-6C) protocol;
3. Working frequency FCC 902~928MHz
4. Works in broad spectrum frequency hopping (FHSS) or fixed frequency transmission mode;
5. Output power: maximum 30dBm (adjustable), optional 33dBm;
6. Using 6dBi circular polarization or linear polarization antenna, the card reading distance range is 0m~8m*;
7. Support power-on card reading mode, command card reading mode, trigger card reading mode, etc.;
8. DC12V power supply, supports up to 24V power supply;
9. The communication interface supports RS232, RJ45, Wiegand WG26, WG34, GPIO input and output, RS485, etc.;
10. One relay (customized) can control high-power equipment such as speakers, motors, lights, etc.;
11. Support RS485, TCP/IP ModBus protocol to connect to PLC;
12. Tag filtering function: If the RFID device reads the same tag multiple times, it can be set to only send it to the backend server once per unit time;
13. Offline storage function: When the RFID device and server are disconnected from the Internet, the RFID device will automatically save to the local area and record 8,000 pieces of data.
14. Whitelist function: For the RFID electronic tags in the whitelist, the device directly triggers the relay to control the access gate release or the indicator light flashing; the default is 2,000 RFID electronic tags or 10,000 RFID electronic tag data;
*The effective distance is related to the protocol format, external antenna, electronic tag and working environment.
Product model explanation:
| Model |
Interface |
| JH6006 |
Standard version (RS232, RS485, Wiegand, trigger) |
| JH6006N |
Standard version and RJ45 |
| -N:RJ45 |
Electrical properties:
Limit parameters
| Project |
Symbol |
Numerical Value |
Unit |
| Voltage |
VCC |
24 |
V |
| Operating Temperature |
TOPR
|
-20~+60 |
ºC |
| Storage Temperature |
TSTR
|
-40~+85 |
ºC |
Specification(Unless otherwise specified, the specifications shown are taken under the working conditions of TA=25ºC and VCC=+12V)
| Project |
Symbol |
Smallest |
Typical |
Maximum |
Unit |
| Voltage |
VCC |
8 |
12 |
24 |
V |
| Working Current |
IC
|
|
500 |
600 |
mA |
| Working Frequency |
FREQ
|
865 |
|
928 |
MHz |
Product Parameters
| Model |
JH6006 |
| Product Name |
UHF long distance ultra high frequency reader and writer |
| Physical Parameter |
| Size |
133*133*52mm |
| Weight |
0.6kg |
| Shell material |
ABS+aluminum |
| Device color |
White |
| Installation method |
Back clamp fixation |
| Pole diameter |
Φ 40-50mm |
| Maximum wind resistance |
50m/s |
| Package Size |
359*204*89CM |
| Antenna gross weight |
0.9kg |
| Environmental parameters |
|
| Operating temperature |
-20~+60ºC |
| Storage temperature |
-40~+85ºC |
| Working humidity |
5%~95%RH,Non-condensing |
| waterproof level |
IP67 |
| Performance parameters |
| working frequency |
902-928MHz |
| H side HPBW |
106±5ºC |
| E side HPBW |
106±5ºC |
| front to back ratio |
≥25 |
| standing wave ratio |
≤1.3 |
| Output Power |
0-30dBm or 33dBm |
| Lightning protection |
DC ground |
| Antenna specifications |
6dBi circularly polarized antenna |
| Card reading distance |
0-8M (*The effective distance is related to the electronic tag and the working environment) |
| Writing distance |
0-4M (*The effective distance is related to the electronic tag and the working environment) |
| Card reading speed |
200 times/S |
| Read/write card type |
IS018000-6C (EPC Gen2)/can be customized to national standard |
| Card reading tips |
buzzer, indicator light |
| Operating Voltage |
DC +9-24V |
| Operating mode |
Active mode, command mode, trigger mode |
| Communication Interface |
RS232 (serial port), RS485, Wiegand 26, Wiegand 34, GPIO output
(Optional: RJ45 (network port) |
| Whitelist capacity |
The default is 2000 items, which can be expanded to 10000 items. |
| Save records offline |
8,000 pieces of offline record data |
| Tag filtering |
Supports tag filtering function. The same tag is sent once per unit time, which facilitates the backend server to process business data and reduces data traffic. |
| Access password function |
Only tags with correct access passwords will send the read data to the server. |
| SDK development kit |
| SDK development kit |
C# Development Kit C++ |
Detailed Photos
Installation Instructions
Tail line diagram:
Please refer to the above design drawing for the following definitions:
1. Serial port (RS232) interface (connected to the host computer) 2. Network cable (RJ45) interface (connected to the host computer)
3. DC 9-12V power cord (power supply) 4. Relay (3PIN)
5. GPIO input (4PIN) (trigger input)
Reference pattern 915MHz:
S Parameter:
Company Profile
Shenzhen JianHe Smart card Technology Co.,Ltd was founded in 2004.As the only Honored and certified China National Hi-Tech Enterprise for smart card industry, jianhe is offering a complete range of card solutions such as magnetic cards , barcode cards, VIP cards,membership cards, gift cards, portrait cards, contact IC cards, CPU cards, RFID cards, blank cards, visual cards,RF Inlay, HF/UHF inlay, label, UHF label, E-label, smart seal, anti-tamper label, library label, and windshield label,etc, half-products like inlay and card related readers and printers, which have been widely used in Hotel Access, Access control, time&attendance, Parking system, Transportation, telecommunication, education, finance, social security, tourism, shopping malls, commerce, tax, enterprise All-in-one card system, etc.
With 5 million US dollars of register capital, 1.5 million production equipment investment, Jianhe has over 5,000 square meters of GB/T 19001-2008/ISO9001:2008 standard plant, in which, over 3,000 square meters of 10,000 class antistatic and dust free constant temperature and humidity workshop. Equipped with latest HEIDELBERG for colors printing press, whole-automatic IC packing machine, whole-automatic embedded wiring machines, etc. Over 400 employees working and offering their best service in the factory, over 15 million cards each month are delivered to customers and partners all in the world.
As a shining star in smart card and RFID labels industry , we are working hard to extend our business more widely and deeply in different applications in both domestic and overseas markets. We have been and will be providing excellent quality products and comprehensive service for worldwide customers all the times.
Audited Supplier 
){kind=link}
){kind=link}